Services

We can also supply the service in Wind power field such as:

• Inspection and mainternance for wind blades.
• Re-tightening bolts and nuts of wind tower and wind blades.
• Repair of wind blades and re-paint

All most this jobs need to be used the rope access to approach.

Not only in NDT but also, we can provide the other services such as:

• Cargo lifting gear, Crane and Winches inspection: Load test up to 400 Ton, rope pear socket and replace cable up to 86 mm.
• Corrosion control: Using High pressure water- Dry sand blasting - Wet sand blasting to clean the surface ready for the application of new paint.
• Mainternance and repair: Steel work on the ship in service and offshore.

QMI Co., LTD also provides technicians, who holds the certificate in rope access (IRATA) and equipments. 

Load test for Towing winch / Crane / Bollar / Lifting Gear / Shackles / Rope and Cable on Offshore Supply Vessel  

We can also provide you the good service on Offshore Supply Vessel for safety to comply with the requirements of oil major. Load test / Dye check / Resocket…

Pressure test for piping systems on Oil-Chemical-Gas Tanker

As the request of the Owner, QMI we can offer hydrostatically pressure test for the piping systems on board ship, to comply with Rules and Requirements of Class and Third party.

The Hydrostatical test can be carried out by water or Nitrogen gas.

At present, we are expanding the scope of service such as corrosion control for RIG, FSO, FPSO, ship's hull, ballast tanks... by wet and dry sand blasting method with modern equipment.

Thickness Measurement, especially for tankers, FSO, FPSO, RIG and Bulk carrier, our company can provide rope access to approach instead of traditional methods such as cherry picker, scaffolding.

Tightness of hatch covers
Approximately one third of all P&I claims are cargo-related. A significant portion of cargo claims is caused by water damage, of which numerous cases relate to ingress of sea water via the hatch covers of dry cargo vessels. Reports of leaking hatch covers are the most frequent cause for selecting a vessel for an unscheduled condition survey.

Phased array ultrasonic systems utilize multi- element probes, which are individually excited under computer conrtrol. By exciting each element in a controlled manner, a focused beam of ultrasound can be generated. Software enables the beam to be steered. Two and three dimensional views can be generated showing the sizes and locations of any flaws detected.

Phased  array can  be used for lnspection of Welds, Thickness measurements,   Corrosion inspection and Flaw detection.

The radiographic testing (RTI) technique involves the use of penetrating gamma or X- radiation to examine parts, welds and products for imperfections. An X-ray machine or radioactive isotope are used as a source of radiaton, where the radiation is directed through a part and onto film.

Magnetic particle testing (MPT) processes are non-destructive methods for the detection of surface, nar-surface and sub-surface defects and flaws in ferrous and ferromagnetic materials.

The usage of an Ultrasonic Thickness Measurment (UTM) for non-destructive testing to check material properties such as thickness measurement, is now regularly utilized in all areas of industrial measurements.